7-8
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 7 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
DND When DND is turned on, no audible rings occur during the
ringing-in state of a call or no audible or visual
notifications of any type occur.
You can configure the phone to have a softkey template
with a DND softkey or a phone-button template.
Note DND is available in Cisco Unified
Communications Manager 6.0(1), 6.1(1), or 7.0(1)
only.
The following DND parameters are configurable in
Cisco
Unified Communications Manager Administration:
• DND—This checkbox allows you to enable DND on a
per-phone basis. Use Cisco Unified Communications
Manager Administration > Device > Phone > Phone
Configuration.
• DND Option—Choose “Call Reject” (to turn off all
audible and visual notifications), or “Ringer Off” (to
turn off only the ringer). DND Option appears on both
the Common Phone Profile window and the Phone
Configuration window (Phone Configuration window
value takes precedence).
• DND Incoming Call Alert—Choose the type of alert to
play, if any, on a phone for incoming calls when DND
is active. This parameter is located on both the
Common Phone Profile window and the Phone
Configuration window (Phone Configuration window
value takes precedence).
• BLF Status Depicts DND—Enables DND status to
override busy/idle state.
For more information, refer to:
• Cisco Unified CallManager Features
and Services Guide, “Do Not Disturb”
chapter.
• Cisco Unified Communications
Manager Administration Guide.
Extension Mobility Enables users to sign into their DN from any Cisco Unified
IP Phone. It also enables users to temporarily apply a phone
number and user profile settings to a Cisco Wireless
Unified IP Phone by logging into the Extension Mobility
service on that phone.
For more information, refer to:
• Cisco Unified Serviceability
Administration Guide
• Cisco Unified Communications
Manager Features and Services
Guide, “Cisco Unified
Communications Manager Extension
Mobility” chapter.
• Cisco Unified Communications
Manager Business Edition, “Cisco
Extension Mobility” chapter.
Fast Dial Service Allows a user to enter a Fast Dial code to place a call. Fast
Dial codes can be assigned to phone numbers or Personal
Address Book entries. (See
Services, page 7-12.)
For more information, refer to Cisco
Unified Communications Manager System
Guide, “Cisco Unified IP Phone Services”
chapter.
Table 7-1 Telephony Features for the Cisco Unified Wireless IP Phone 7925G (continued)
Feature Description Configuration Reference
To Next Page
Loading...
