7-11
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 7 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Message waiting
indicator
A light on the handset that indicates that indicates that a
user has one or more new voice messages.
For more information refer to:
• Cisco Unified Communications
Manager Administration Guide,
“Message Waiting Configuration”
chapter.
• Cisco Unified Communications
Manager System Guide, “Voice Mail
Connectivity to Cisco Unified
Communications Manager” chapter.
Multilevel
Precedence and
Preemption
(MLPP)
Provides a method of prioritizing calls within your phone
system. Use this feature when users work in an
environment where they need to make and receive urgent
or critical calls.
For more information refer to Cisco
Unified Communications Manager
Features and Services Guide, “Multilevel
Precedence and Preemption” chapter.
Music on hold Plays music while callers are on hold. For more information refer to Cisco
Unified Communications Manager
Features and Services Guide, “Music On
Hold” chapter.
Onhook call
transfer
Allows a user to press a single Transfer softkey and then go
onhook to complete a call transfer.
For more information refer to Cisco
Unified Communications Manager System
Guide, “Cisco Unified IP Phones” chapter.
Other group pickup Allows a user to answer a call ringing on a phone in another
group that is associated with the user's group.
(See Call pickup, page 7-5 and Group call pickup,
page 7-9.)
For more information refer to Cisco
Unified Communications Manager
Features and Services Guide, “Call Pickup
Group Configuration” chapter.
Presence-enabled
directories
Allows a user to monitor the call state of another directory
number (DN) listed in call logs, speed-dials, and corporate
directories. The Busy Lamp Field (BLF) for the DN
displays the call state.
For more information, refer to Cisco
Unified Communications Manager
Features and Services Guide, “Presence”
chapter.
Privacy Enables a user to allow or disallow other users of
shared-line devices to view the device all information or to
enable another user to barge into its active call.
For more information refer to:
• Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter.
• Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
• Cisco Unified Communications
Manager Features and Services Guide
“Barge and Privacy” chapter.
Push to Talk Allows users to call a target phone number or group and
announce a message (similar to a two-way radio) by using
a configurable applications button.
For more information, see “Setting Up
Services” section on page 7-17.
Requires an XML application to provide
Push to Talk service.
Table 7-1 Telephony Features for the Cisco Unified Wireless IP Phone 7925G (continued)
Feature Description Configuration Reference
To Next Page
Loading...
