Cisco 7925G - Unified Wireless IP Phone VoIP - Page 156

7-12
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 7 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Quality Reporting
Tool (QRT)
Allows users to use the QRT softkey on a phone to submit
information about problem phone calls. QRT can be
configured for either of two user modes, depending upon
the amount of user interaction desired with QRT.
For more information refer to:
• Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
• Cisco Unified Communications
Manager Features and Services
Guide, “Quality Report Tool” chapter.
Redial Allows users to call the most recently dialed phone number
by using a softkey option.
Requires no configuration.
Ring setting Identifies ring type used for a line when a phone has
another active call.
For more information refer to:
• Cisco Unified Communications
Manager 4.x Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter.
• Cisco Unified Communications
Manager 5.x Administration Guide,
“Configuring Directory Numbers”
chapter.
• Cisco Unified Communications
Manager Features and Services
Guide, “Custom Phone Rings”
chapter.
• “Creating Custom Phone Rings”
section on page 7-21.
Services Allows you to use the Cisco Unified IP Phone Services
Configuration menu in Cisco Unified
Communications
Manager Administration to define and maintain the list of
phone services to which users can subscribe.
For more information refer to:
• Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter.
• Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phone Services” chapter.
Shared Line Allows users to have multiple phones that share the same
phone number or allows users to share a phone number
with a coworker.
For more information refer to Cisco
Unified Communications Manager System
Guide, “Cisco Unified IP Phones” chapter.
Speed dial Dials a specified number that has been previously stored.
Speed dialing includes these features:
• Speed-dial hot keys configured and stored in the local
Phone Book on the wireless IP phone.
• Line view speed-dial numbers configured from the
User Options web page.
See Abbreviated Dialing, page 7-2 and Fast Dial Service.
For more information refer to:
• Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified
IP Phone
Configuration” chapter.
• Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
Table 7-1 Telephony Features for the Cisco Unified Wireless IP Phone 7925G (continued)
Feature Description Configuration Reference