Cisco Catalyst 2950 - Page 649

Index
IN-7
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-12
booting 4-12
CDP 23-2
DHCP 19-6
DHCP option 82 19-6
DHCP snooping 19-6
DNS 7-16
EtherChannel 30-8
IEEE 802.1x 9-11
IGMP filtering 20-23
IGMP snooping 20-8
IGMP throttling 20-24
initial switch information 4-3
Layer 2 interfaces 10-9
MAC address table 7-21
MSTP 14-12
MVR 20-19
NTP 7-4
optional spanning-tree features 15-14
password and privilege level 8-2
port security 21-8
QoS 29-18
RADIUS 8-20
RMON 25-3
RSPAN 24-7
SNMP 27-6
SPAN 24-7
storm control 21-2
STP 13-11
system message logging 26-3
system name and prompt 7-15
TACACS+ 8-13
UDLD 22-4
VLAN, Layer 2 Ethernet interfaces 16-17
VLANs 16-7
VMPS 16-26
voice VLAN 18-2
VTP 17-6
default gateway 4-10
deleting VLANs 16-10
denial-of-service attack 21-1
description command 10-15
destination addresses, in ACLs 28-11
detecting indirect link failures, STP 15-10
device discovery protocol 23-1
device manager described 1-2, 1-9
DHCP-based autoconfiguration
client request message exchange
4-4
configuring
client side
4-4
DNS 4-6
relay device 4-7
server-side 4-5, 19-7
TFTP server 4-6
described 1-4
example 4-9
lease options
for IP address information
4-5
for receiving the configuration file 4-6
overview 4-3
relationship to BOOTP 4-4
DHCP binding database
See DHCP snooping binding database
DHCP binding table
See DHCP snooping binding database
DHCP option 82
circuit ID suboption
19-5
configuration guidelines 19-6
default configuration 19-6
displaying 19-8
overview 19-3
packet format, suboption
circuit ID
19-5
remote ID 19-5
remote ID suboption 19-5
DHCP server 19-7
DHCP snooping
accepting untrusted packets form edge switch
19-3, 19-7
binding database