Index
IN-17
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-12
redundant Gigabit backbone 1-13
hotel network 1-17
large campus 1-21
long-distance, high-bandwidth transport
configuration
1-24
service-provider central-office network 1-20
small to medium-sized network 1-15
network management
CDP
23-1
RMON 25-1
SNMP 27-1
Network Time Protocol
See NTP
no commands
2-4
nonhomologated POTS splitter
See Cisco LRE POTS Splitter (PS-1M-LRE-48)
nontrunking mode
16-16
normal-range VLANs
configuration modes
16-6
defined 16-1
note, described xxviii
NSM 5-3
NTP
associations
authenticating
7-4
defined 7-2
enabling broadcast messages 7-6
peer 7-5
server 7-5
default configuration 7-4
displaying the configuration 7-11
overview 7-2
restricting access
creating an access group
7-8
disabling NTP services per interface 7-10
source IP address, configuring 7-10
stratum 7-2
synchronizing devices 7-5
time
services
7-2
synchronizing 7-2
O
out-of-profile markdown 1-7
P
PAgP
See EtherChannel
pass-through mode
29-25
passwords
default configuration
8-2
disabling recovery of 8-5
encrypting 8-4
overview 8-1
recovery of 31-2
setting
enable
8-3
enable secret 8-4
Telnet 8-6
with usernames 8-7
VTP domain 17-8
patch panel 1-18
path cost
MSTP
14-18
STP 13-18
PBX 1-17
performing an LRE upgrade 12-24, 12-25
persistence, LRE link 12-19
per-VLAN spanning-tree plus
See PVST+
physical ports
10-1
PIM-DVMRP, as snooping method 20-9
To Next Page
Loading...
