6-17
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
OL-26520-01
Chapter 6 Clustering Switches
Using SNMP to Manage Switch Clusters
If a cluster member switch has its own IP address and community strings, they can be used in addition
to the access provided by the cluster command switch. For more information about SNMP and
community strings, see Chapter 30, “Configuring SNMP.”
Figure 6-7 SNMP Management for a Cluster
Tra p
Tra p
Tra p
Command switch
Trap 1, Trap 2, Trap 3
Member 1 Member 2 Member 3
33020
SNMP Manager
To Next Page
Loading...
