Cisco CATALYST 2960

Index
IN-26
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
OL-26520-01
port description TLV 26-2
Port Fast
described
18-2
enabling 18-12
mode, spanning tree 13-25
support for 1-8
port membership modes, VLAN 13-3
port priority
MSTP
17-20
STP 16-18
ports
access
12-3
blocking 23-7
dual-purpose uplink 12-4
dynamic access 13-4
protected 23-6
secure 23-9
static-access 13-3, 13-10
switch 12-2
trunks 13-3, 13-14
VLAN assignments 13-10
port security
aging
23-17
and QoS trusted boundary 33-45
and stacking 23-18
configuring 23-12
default configuration 23-11
described 23-8
displaying 23-20
on trunk ports 23-14
sticky learning 23-9
violations 23-10
with other features 23-11
port-shutdown response, VMPS 13-24
port VLAN ID TLV 26-2
power management TLV 26-3, 26-7
Power over Ethernet
See PoE
preemption, default configuration
19-8
preemption delay, default configuration 19-8
preferential treatment of traffic
See QoS
preventing unauthorized access
9-1
primary links 19-2
priority
overriding CoS
15-6
trusting CoS 15-6
private VLAN edge ports
See protected ports
privileged EXEC mode
2-2
privilege levels
changing the default for lines
9-9
command switch 6-16
exiting 9-9
logging into 9-9
mapping on member switches 6-16
overview 9-2, 9-7
setting a command with 9-8
protected ports 1-10, 23-6
protocol storm protection 23-18
provisioned switches and IP source guard 20-15
provisioning new members for a switch stack 7-7
proxy reports 19-4
pruning, VTP
disabling
in VTP domain
14-16
on a port 13-19
enabling
in VTP domain
14-16
on a port 13-18
examples 14-7
overview 14-6
pruning-eligible list
changing
13-18
for VTP pruning 14-6
VLANs 14-16
PVST+
described
16-10