Index
IN-32
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
OL-26520-01
small form-factor pluggable modules
See SFPs
small-frame arrival rate, configuring
23-5
SNAP 25-1
SNMP
accessing MIB variables with
30-5
agent
described
30-4
disabling 30-8
and IP SLAs 32-2
authentication level 30-11
community strings
configuring
30-8
for cluster switches 30-4
overview 30-4
configuration examples 30-18
default configuration 30-7
engine ID 30-7
groups 30-7, 30-10
host 30-7
ifIndex values 30-6
in-band management 1-7
in clusters 6-13
informs
and trap keyword
30-13
described 30-5
differences from traps 30-5
disabling 30-16
enabling 30-16
limiting access by TFTP servers 30-17
limiting system log messages to NMS 29-10
manager functions 1-5, 30-3
managing clusters with 6-16
notifications 30-5
overview 30-1, 30-5
security levels 30-3
setting CPU threshold notification 30-16
status, displaying 30-19
system contact and location 30-17
trap manager, configuring 30-14
traps
described
30-4, 30-5
differences from informs 30-5
disabling 30-16
enabling 30-13
enabling MAC address notification 5-16, 5-18,
5-19
overview 30-1, 30-5
types of 30-13
users 30-7, 30-10
versions supported 30-2
SNMP and Syslog Over IPv6 35-5
SNMPv1 30-2
SNMPv2C 30-3
SNMPv3 30-3
snooping, IGMP 21-2
software compatibility
See stacks, switch
software images
location in flash
A-25
recovery procedures 39-2
scheduling reloads 3-23
tar file format, described A-25
See also downloading and uploading
source addresses
in IPv4 ACLs
31-10
in IPv6 ACLs 37-5
source-and-destination-IP address based forwarding,
EtherChannel
38-9
source-and-destination MAC address forwarding,
EtherChannel
38-9
source-IP address based forwarding, EtherChannel 38-9
source-MAC address forwarding, EtherChannel 38-8
SPAN
and stack changes
27-10
configuration guidelines 27-11
default configuration 27-10
destination ports 27-8
displaying status 27-23
To Next Page
Loading...
