Cisco SPA 502G Administration Guide

Configuring Security, Quality, and Network Features
Configuring Voice Codecs
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 127
5
G723 Enable To enable the use of the G.723a codec at 6.3 kbps, select yes.
Otherwise, select no.
Defaults to yes.
NOTE Not applicable to the WIP310, SPA 525G/G2, or Cisco
SPA 300 Series.
G726-16 Enable To enable the use of the G.726 codec at 16 kbps, select yes.
Otherwise, select no.
Defaults to yes.
NOTE Not applicable to the WIP310 or SPA 525G/525G2.
G726-24 Enable To enable the use of the G.726 codec at 24 kbps, select yes.
Otherwise, select no.
Defaults to yes.
NOTE Not applicable to the WIP310 or SPA 525G/525G2.
G726-32 Enable To enable the use of the G.726 codec at 32 kbps, select yes.
Otherwise, select no.
Defaults to yes.
G726-40 Enable To enable the use of the G.726 codec at 40 kbps, select yes.
Otherwise, select no.
Defaults to yes.
NOTE Not applicable to the WIP310 or SPA 525G/525G2.
Release Unused
Codec
Allows the release of codecs not used after codec negotiation
on the first call so that other codecs can be used for the
second line. To use this feature, select yes.
Defaults to yes.
DTMF Process AVT Select yes to process RTP DTMF events. Otherwise, select no.
If this parameter is set to no, the AVT payload type is not
included in outbound SDP.
Defaults to yes.
Silence Supp Enable To enable silence suppression so that silent audio frames are
not transmitted, select yes. Otherwise, select no. See
“Ensuring Voice Quality” section on page 120.
Defaults to no.
Parameter Description

Cisco SPA 502G Specifications

General

Brand	Cisco
Model	SPA 502G
Category	IP Phone
Language	English