Cisco SPA 502G Administration Guide

Configuring the Cisco SPA 500S Attendant Console
Monitoring the Cisco SPA 500S
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 197
9
Monitoring the Cisco SPA 500S
To display the status of the Cisco SPA 500S, click the Attendant Console Status
link on the GUI. The status of each attendant console attached (Unit 1 and Unit 2) is
shown. Parameters are read-only.
Server Type Selects the type of server used (SPA9000, BroadSoft,
or Asterisk).
Test Mode Enable Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back to off.
In test mode, when all the buttons on the attendant
console are returned to off, all the keys become
orange. The phone must be rebooted after the test is
completed.
Attendant Console Call
Pickup Code
The star code used for picking up a ringing call.
Defaults to *98.
BLF List URI Automatically configures BLF subscriptions for all
users on a monitored list.
Unit 1 Key 1-32 Enter a strings that define the extension and other
parameters associated with each lighted button on the
first Cisco SPA 500S unit. Keywords and values are
case-sensitive. The configuration script is described in
“Unit/Key Configuration Scripts” section on
page 192
.
Parameter Description

Cisco SPA 502G Specifications

General

Brand	Cisco
Model	SPA 502G
Category	IP Phone
Language	English