Cisco SPA 502G Administration Guide

Getting Started
Using the Web-Based Configuration Utility
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 15
1
The Administrator account can modify all web profile parameters, including web
parameters available to the user login. The Administrator specifies the parameters
that a User account can modify using the Provisioning tab of the configuration
utility.
NOTE No default passwords are assigned to either the Administrator or User accounts.
Only the Administrator account can assign and change passwords.
Accessing Administrative Options
To access administrative options, either:
• Log in to the configuration utility, then click Admin Login.
• Enter the following URL when accessing the configuration utility:
http://phone.ip.address/admin/
NOTE To save changes on a web page, click Submit All Changes before switching
between User and Admin Login or between basic and advanced views. Switching
logins or views discards any unsubmitted changes.
Understanding Basic and Advanced Views
These views are similar, but advanced view shows more options on each web
page. To see all available options for your login, use the
advanced view.
Using the Web Administration Tabs
Each tab contains different parameters. Some tasks require you to set parameters
in different tabs.
For field reference about each parameter available on the configuration utility, see
Appendix B, “Cisco SPA IP Phone Field Reference.”

Cisco SPA 502G Specifications

General

Brand	Cisco
Model	SPA 502G
Category	IP Phone
Language	English