Customizing Cisco SPA and Wireless IP Phones
Configuring Bluetooth (Cisco SPA 525G/525G2 only)
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 69
3
STEP 10 Scroll to Connect Automatically and press the Right Arrow key to turn to On.
STEP 11 Press Connect. The profile screen displays and a check mark appears next to the
headset if the connection was successful.
Pairing Your Cisco SPA 525G2 with a Bluetooth-Enabled
Mobile Phone
This feature is based on the following standard Bluetooth profiles:
• Phone Book Access Profile 1.0
• Handsfree Profile 1.5
• Handset Profile 1.1
Make sure your mobile phone provides support for the above profiles. Cisco
provides a reference list of Bluetooth-enabled mobile phones supported with the
Cisco SPA 525G2. See the Cisco support community at http://www.cisco.com/
go/smallbizsupport and also consult the latest Cisco SPA 525G2 release notes,
available at cisco.com.
NOTE For more detailed instructions, including screen shots, see the
Cisco Small
Business SPA 525/525G2 User Guide (SIP)
or the
Cisco Unified Communications
Manager Express for the Cisco Small Business IP Phone SPA 525G/525G2 (SPCP)
User Guide
.
To pair your Cisco SPA 525G2 with your Bluetooth-enabled mobile phone, you can
either initiate pairing from the Cisco SPA 525G2, or from your mobile phone.
Initiating Pairing from the Cisco SPA 525G2
STEP 1 Enable Bluetooth as described in the “Enabling Bluetooth (Cisco SPA 525G/
525G2)” section on page 66.
STEP 2 Press the Setup button.
STEP 3 Scroll to User Preferences and press Select.
STEP 4 Scroll to Bluetooth Configuration and press Select.
STEP 5 Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
To Next Page
Loading...
Need help?
General
