Cisco SPA 502G Administration Guide

Cisco SPA IP Phone Field Reference
Attendant Console Tab (Cisco SPA 500 Series)
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 293
B
For more information, see Chapter 9, “Configuring the Cisco SPA 500S
Attendant Console.”.
Unit 2
See the description for Unit 1 above. Enter a strings that define the extension and
other parameters associated with each lighted button on the second Cisco SPA
500S unit. Keywords and values are case-sensitive. The configuration script is
described in the “Setting Up the Cisco SPA 500S Attendant Console” section
on page 188.
Subscribe Delay Length of delay before attempting to subscribe.
Defaults to 1.
Unit 2 Enable Enables or disables the second Cisco SPA 500S unit
(each IP phone can have up to two Cisco SPA 500Ss
attached).
Server Type Selects the type of server used (Cisco SPA 9000,
BroadSoft, or Asterisk).
Test Mode Enable Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back to off.
In test mode, when all the buttons on the Cisco SPA
500S are returned to off, all the keys become orange.
The IP phone must be rebooted after the test is
completed.
Attendant Console Call
Pickup Code
The star code used for picking up a ringing call.
Defaults to *98.
BLF List URI Automatically configures BLF subscriptions for all
users on a monitored list. See Configuring BroadSoft
Busy Lamp Field Auto-Configuration, page 195.
Unit 1 Key 1-32 Enter a strings that define the extension and other
parameters associated with each lighted button on the
first Cisco SPA 500S unit. Keywords and values are
case-sensitive. The configuration script is described in
the “Unit/Key Configuration Scripts” section on
page 192
.
Parameter Description

Cisco SPA 502G Specifications

General

Brand	Cisco
Model	SPA 502G
Category	IP Phone
Language	English