Cisco SPA 502G Administration Guide

Configuring Regional Parameters and Supplementary Services
Configuring Supplementary Services (Star Codes)
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 159
7
Configuring Supplementary Services (Star Codes)
The Cisco IP phones provide native support of a large set of enhanced or
supplementary services (also known as star codes). A user can enter star codes
(such as *21 for call forward, followed by the target number) to perform call
features such as call return, blind call transfers, call pickup, and so on. These
codes can be handled locally by the phone or to be sent to the network as an
INVITE to the service provider.
NOTE Some service providers choose to disable star codes. See “Configuring
Supplementary Services (Star Codes)” section on page 159.
Entering Star Code Values
The phone provides default values for star codes. You can change the default star
code values for your area or region.
Interdigit Short
Timer
Short timeout between entering digits when dialing. The Interdigit
Short Timer
is used after any one digit, if at least one matching
sequence is complete as dialed, but more dialed digits would
match other as yet incomplete sequences. Range: 0–64 seconds.
Defaults to 3.
Field Description

Cisco SPA 502G Specifications

General

Brand	Cisco
Model	SPA 502G
Category	IP Phone
Language	English