Cisco SPA 502G Administration Guide

Cisco SPA IP Phone Field Reference
Attendant Console Status
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 294
B
Attendant Console Status
This page provides two tabs to display the status of up to two Cisco SPA 500S
units that are supported by a single IP phone:
• Unit 1—Displays information about the first Cisco SPA 500S unit.
• Unit 2—Displays information about the second Cisco SPA 500S unit.
Each tab provides the read-only fields described in the following table:
Parameter Description
Unit Enable Displays if the Unit is enabled or disabled.
Subscribe Expires Displays when the current subscription expires. After
the subscription expires, the Cisco SPA 500S
automatically requests a new subscription.
HW Version Displays the version of the hardware.
Unit Online Displays whether the unit is powered on and
connected or not.
Subscribe Retry Interval Displays the length of time the Cisco SPA 500S waits
to try again if subscription fails.
SW Version Displays the version of the software currently running
on the unit.
Key Name Displays the name assigned to each key (1-32) on the
Cisco SPA 500S unit.
Type Displays the function enabled for each key (1-32) on the
Cisco SPA 500S unit.
Line Displays the extension assigned to each key (1-32) on
the Cisco SPA 500S unit.
Station Displays the subscribe URI configured for each key (1-
32) on the Cisco SPA 500S unit.

Cisco SPA 502G Specifications

General

Brand	Cisco
Model	SPA 502G
Category	IP Phone
Language	English