Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 238
B
Vertical Service Activation Codes
The following Vertical Service Activation Codes are automatically appended to
the dial plan.
Parameter Description
Call Return Code This code calls the last caller.
Defaults to *69.
Blind Transfer Code Begins a blind transfer of the current call to the
extension specified after the activation code.
Defaults to *98.
Call Back Act Code Starts a callback when the last outbound call is not
busy.
Defaults to *66.
Call Back Deact Code Cancels a callback.
Defaults to *86.
Cfwd All Act Code Forwards all calls to the extension specified after the
activation code.
Defaults to *72.
Cfwd All Deact Code Cancels call forwarding of all calls.
Defaults to *73.
Cfwd Busy Act Code Forwards busy calls to the extension specified after
the activation code.
Defaults to *90.
Cfwd Busy Deact Code Cancels call forwarding of busy calls.
Defaults to *91.
Cfwd No Ans Act Code Forwards no-answer calls to the extension specified
after the activation code.
Defaults to *92.
Cfwd No Ans Deact Code Cancels call forwarding of no-answer calls.
Defaults to *93.