Cisco SPA 502G Administration Guide

Configuring Lines and Extensions
Configuring Lines
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 30
2
To configure line keys to access services:
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login.
STEP 3 Click advanced.
STEP 4 Click the Phone tab.
STEP 5 Find the first line to configure (line 4 in this example):
a. From the
Extension drop down list, choose Disabled.
b. Enter the following string in the Extended Function field:
fnc=type
where:
• fnc: function
• type: choose from the following:
- xml: pressing the line button accesses XML services.
NOTE The XML service configured on the Phone tab under the XML
Service field is used (see the “Configuring XML Services” section on
page 80). You can specify a different XML service to connect to by using
the syntax “fnc=xml;URL=http://xxx.xx.xxx/entry.html” where xxx.xx.xxx
is the URL of the XML service.
- mp3: pressing the line button starts the mp3 player.
- weather: pressing the line button accesses weather information.
- news: pressing the line button accesses news.
For example, to configure line 4 for the mp3 player:
fnc=mp3
STEP 6 Click Submit All Changes. After the phone reboots, configured lines glow orange
and display the following icons next to the extension label:
• xml: XML icon
• mp3: mp3 player icon (Cisco SPA 525G/525G2)

Cisco SPA 502G Specifications

General

Brand	Cisco
Model	SPA 502G
Category	IP Phone
Language	English