- 55 -
(1) Printer status (When n = 1 is specified)
Bit Status Hex. Decimal
0 Fixed 00 0
1 Fixed 02 2
Status of pin 3 of drawer kick-out connector = L 00 0
2
Status of pin 3 of drawer kick-out connector = H 04 4
Online status 00 0
3
Offline status 08 8
4 Fixed 10 16
Not waiting online recovery 00 0
5
Waiting online recovery 20 32
FEED switch is not pressed 00 0
6
FEED switch is pressed 40 64
7 Fixed 00 0
(2) Status caused by an offline condition (When n = 2 is specified)
Bit Status Hex. Decimal
0 Unused 00 0
1 Unused 02 2
Cover closed 00 0
2
Cover open 04 4
Not in paper feed state triggered by FEED switch 00 0
3
In paper feed state triggered by FEED switch 08 8
4 Unused 10 16
Printing is not stopped because of “paper out” state 00 0
5
Printing is stopped because of “paper out” state 20 32
Error not occurred 00 0
6
Error occurred 40 64
7 Unused 00 0
Bit 5: Printing is stopped if the Paper-end detector detects a “paper out” state, or if
the printer is out of paper when the Paper Near-end Sensor is enabled by
ESC c 4. At this time, bit 5 = 1.
To Next Page
Loading...
