Claas ROLLANT 250 - Hydraulic baling pressure preadjustment

000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255 8.1.9
Setting up the baler
ROLLANT 240/250 up to 72507006, up to 74900805
ROLLANT 254/255 and 240/250 from 72507007 / 74900806
Hydraulic baling pressure preadjustment
The ROLLANT 240/250/245/255 RC is fitted with an
adjustable pressure-limiting valve (D), which controls
the baling pressure. The baling pressure can be
reduced or increased with the handwheel (A).
ROLLANT 240/250 (up to 72507006, up to 74900805)
The baling pressure can be set to a maximum of
130 bar (1885 psi) by turning the hand wheel all the
way in.
The baling pressure can be set to a minimum of 70 bar
(1015 psi) by turning the hand wheel all the way out.
ROLLANT 254/255 and ROLLANT 240/250
(from 72507007 / 74900806)
The baling pressure can be set to a maximum of
150 bar (2176 psi) by turning the hand wheel all the
way to the right.
The baling pressure can be set to a minimum of 70 bar
(1015 psi) by turning the hand wheel all the way to the
left.
(Fig. 20, 21)
D
A
20
D
A
21