Claas ROLLANT 250 - Bale Counter; Switch Position with Net Wrapping; Switch Position with Double Twine Wrapping

000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255 9.1.5
Operation
Bale counter
The bale counter (B) is located at the left side of the
baler. The counter is activated each time the tailgate is
opened.
Note!
When resetting the bale counter, always set it
back to “0”, otherwise it will not work.
(Fig. 5)
Switch position with net wrapping
Note!
The rotary switch (1) at the control box must be
set to (N).
The rotary switch (2) must be in either position (E) or
(A) and must not be set to position “0”.
Switch position with double twine wrapping
Note!
The rotary switch (1) at the control box must be
set to (G).
The rotary switch (2) must be in either position (E) or
(A) and must not be set to position “0”.
(Fig. 6)
5
G
N
1
2
3
4
A
E
28268
6