000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255 14.1.1
Maintenance
IMPORTANT NOTES ON MAINTENANCE
General notes on maintenance
General notes
Danger!
Repairs, maintenance and cleaning work as
well as the rectification of functional faults
must generally be performed with the power
take-off shaft switched off and the tractor
engine shut down – remove the ignition key!
Safety lock for tailgate
Danger!
When working on the opened tailgate and
inside the baling chamber lock the tailgate
with the safety lock.
Wheels / tires
Danger!
Repair work on tires and wheels must only
be performed by qualified personnel and the
use of appropriate assembly tools!
With a too high tire pressure there is danger
of bursting!
☞ The specified tire pressure, see technical
data, must be complied with.
☞ Do not stand next to the tire when
inflating!
☞ Check the air pressure at regular intervals!
When working on the wheels make sure that
the round baler is safely parked and secured
against rolling (wheel chocks).
When working under the jacked-up round
baler no persons should be on the machine.
Ensure sufficient load bearing capacity of the
lifting equipment.
Whenever assembling wheels retighten wheel nuts or
bolts after the first 10 operating hours, then check for
tightness every 50 operating hours. Tightening torques
see Technical Data.
Maintenance
To Next Page
Loading...
Need help?
General
