000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255 11.6.7
CLAAS COMMUNICATOR - operation
Automatic net wrapping
Automatic wrapping is the standard wrapping system
of the baler.
– Drive to the swath to form a bale.
– When the bale is finished, an acoustic and visual
alarm (P and Q) is activated.
– Stop the tractor so that the wrapping process can
start. The time between the end of the bale
wrapping and the start of the wrapping can be set.
See »operator settings« for detailed information.
Note!
The (K) and (L) symbols flash when wrapping
starts and flash during the entire wrapping
process.
Note!
If the time between the warning sound (which
indicates that the bale is finished) and the
beginning of the automatic wrapping is not
sufficient for stopping the machine, this delay
time should be activated and set in the
adjustment menu.
(Fig. 7)
P
Q
K
7
To Next Page
Loading...
