Claas ROLLANT 250 User Manual

14.3.2 BA ROLLANT 240 - 250 - 254 - 255 - 000 299 119 5
Maintenance
Rollant 240/250 - 540 rpm
Rollant 250/254/255 - 1000 rpm
Rollant 240/250 - 540 rpm
Rollant 240/250/254/255 - 1000 rpm
Angle drive gearbox
Note!
Use only Hypoid transmission oil SAE 90
conforming to (MIL-L-2105 B) API-GL-4-90.
Oil capacities depending on gearbox input speed
Rollant 240/250 - 540 rpm and
Rollant 250/254/255 - 1000 rpm
When using the baler for the first time or after over-
hauling the gearbox, change the oil after the first
50 hours of operation and then every 500 hours of
operation or annually.
E = Bleeder with dipstick
A = Oil drain plug
Environment!
Dispose of old oil and grease properly and with due
regard for the environment.
Checking the oil level:
Note!
The oil level must be checked with the machine
standing in a horizontal position.
Unscrew and remove bleeder (E). Fill gearbox with
gear oil. Screw on the bleeder (E).
(Fig.3,4,5,6)
E
3
E
4
A
5
A
6
Gearbox input speed Filling capacity
540 rpm 1.20 l
(0.32 us gal)
1000 rpm 2.00 l
(0.53 us gal)

Claas ROLLANT 250 Specifications

General

Brand	Claas
Model	ROLLANT 250
Category	Lawn and Garden Equipment
Language	English