Claas ROLLANT 250 - ROLLANT 254;255 with Twine and Net Wrapping (Standard); ROLLANT 254;255 with Twine and Net Wrapping (High Convenience)

000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255 8.2.7
Setting up the baler
ROLLANT 254/255 with twine and net wrapping
(Standard)
Round balers with net and twine wrapping are
adjusted for twine wrapping in the factory.
The conversion from twine to net wrapping is
accomplished by converting the drive and by pressing
the corresponding push button (N or G) on the control
box.
(Fig. 10)
ROLLANT 254/255 with twine and net wrapping
(High Convenience)
In the High Convenience version, the change from
twine to net wrapping while compacting bales is
executed from the control panel or Claas
Communicator.
(Fig. 11, 12)
G
N
10
200400
11
12