Claas ROLLANT 250 - Setting the number of net wraps

11.2.2 BA ROLLANT 240 - 250 - 254 - 255 - 000 299 119 5
CLAAS COMMUNICATOR
Setting the number of net windings
The number of net windings can be set between 1.2
and 4.0 windings.
Turn the incremental encoder (I),
until the »net length« (B) appears
surrounded by a frame. Press the
incremental encoder to confirm.
The frame appears enlarged.
Turn the incremental encoder to
change the value.
Press the incremental encoder to
confirm the new value: the value
is saved. The frame is reduced in size.
(Fig. 3)
Setting the twine length
The number of twine windings can be set between 12
and 30 windings.
Turn the incremental encoder (I),
until the »twine length« (C)
appears surrounded by a frame.
Press the incremental encoder to
confirm. The frame appears
enlarged.
Turn the incremental encoder to
change the number of twine
windings.
Press the incremental encoder to
confirm the new value: the value is saved. The frame
is reduced in size.
(Fig. 4)
I
B
3
1.2
1.2
C
I
4
12
12