Group 26, Steer Axle
26-3-4 • Steering Axle Removal and Replacement SM 765, Dec ’06
9. Carefully raise the truck off the blocking as described
in “Lifting, Jacking and Blocking”. Remove the
blocking and lower the truck to the floor.
10. If removed, reinstall countenveight; refer to Group
38, Section 2, “Counterweight Removal and
Replacement”.
11. Check the axle and steering system for proper opera-
tion. Operate the steering gear to move the steer
wheels to maximum travel in both directions. Note
any unusual motion or noise.
If the system appears to be operating correctly, drive
the truck slowly. Fully steer the vehicle in each direc-
tion and check response.
12. Check steering cylinder hose line connections and
cylinder rod seals for any evidence of oil leakage
before returning the truck to service.
To Next Page
Loading...
