Clear-Com Eclipse HX series - Page 19

Eclipse | Upgrade Guide
Page 19
Order
System component
Upgrade procedure(s)
Notes
MK II (Blue) card only
8
Eclipse HX-PiCo
6.1 Changing the Eclipse HX-PiCo PROM
6.2 Changing the Eclipse HX-PiCo RAM
6.3 Changing the Eclipse HX-PiCo DIP switches
Upgrading the Eclipse HX-PiCo application code
6.4.2 Upgrading the Eclipse HX-PiCo MVX boot and/or app code
using the Renesas FDT
6.6 Upgrading the Eclipse HX-PiCo CPLD and FPGA code with Xilinx
tools
If you are upgrading the PiCo to
an HX-PiCo please contact your
Clear-Com representative to
establish if your hardware is HX
ready. If your PiCo hardware is
not HX ready then this is a
factory only upgrade.
9
AES-6
No upgrade required.
10
EHX configuration /
Dynam-EC software
4.1 Backing up your ECS v5.2.5 configurations
4.3 Installing EHX and Dynam-EC Clients
4.4 Importing your configurations into EHX
11
CPU card
5.1 Changing the CPU card PROM
5.2 Changing the CPU card RAM
5.3 Changing the CPU card DIP switches
5.4 Upgrading the CPU card application code
5.7 Upgrading CPU Card U53 CPLD