Clear-Com Eclipse HX series - Upgrading from 8.5

Eclipse | Upgrade Guide
Page 35
3.7 Upgrading from 8.5
The following table lists the procedures that you will require to upgrade from Eclipse HX v8.5 to Eclipse HX v9.1.
Important note:
The table lists the procedures in the order in which they must be carried out. To go to a procedure, click the cross-reference / link.
Order
System component
Upgrade procedure(s)
Notes
1
E-QUE card
IVC-32 card
LMC-64 card
9.1 Identifying MK1 and MK2 E-QUE cards
9.2 Upgrading the E-QUE card (MK1)
9.3 Upgrading the E-QUE card (MK2)
The procedures used to upgrade
E-QUE cards to Eclipse HX v9.1
can also be used to upgrade IVC-
32 and LMC-64 cards.
No PROM or FPGA upgrade is
required.
2
E-MADI64 card
No upgrade required.
3
E-FIB card
No upgrade required.
4
V-Series
panels
Uboot
14.3 Manually upgrading V-Series Panels
Kernel
Root file
system
App code
14.3 Manually upgrading V-Series Panels