5.5 Setting the matrix type
5.8 Upgrading CPU Card U1 CPLD
5.11 Downloading a test configuration to the CPU card using
EHX
5.9 Upgrading the CPU card U53 CPLD code with Xilinx tools
5.10 Upgrading the CPU card U1 CPLD code with Xilinx tools
Dynam-EC (without EHX
on the same PC)
Dynam-EC is also installed as
part of the EHX/Dynam-EC
combined installer. This section
details how to install the Dynam-
EC client only on a machine i.e.
where only the dynamic online
matrix audio monitoring and
control is required.
Table 3-1: Procedures for upgrading from ECS v5.2.5 to Eclipse HX v9.1
3.2 Upgrading from 7.0
The following table lists the procedures that you will require to upgrade from Eclipse HX v7.0 to Eclipse HX v9.1.
Important note:
The table lists the procedures in the order in which they must be carried out. To go to a procedure, click the cross-reference / link.
To Next Page
Loading...
