3 Quick reference: Upgrading to Eclipse HX v9.1
The upgrade kit includes a Drivers USB, containing the latest firmware files (including Boot and FPGA / CPLD code files) for your Eclipse
HX devices. It also includes a software USB, containing the application code files for your Eclipse HX feature applications. It includes the
EHX configuration software, Dynam-EC audio routing software, and Eclipse HX v9.1 documentation. You require both upgrade media to
complete a full system upgrade. For more information, see 2.1.3 Supplied .
3.1 Upgrading from 5.2.5
The following table lists the procedures that you will require to upgrade from ECS v5.2.5 to Eclipse HX v9.1.
Important note:
The table lists the procedures in the order in which they must be carried out. To go to a procedure, click the cross-reference / link.
E-QUE card
IVC-32 card
LMC-64 card
9.1 Identifying MK1 and MK2 E-QUE cards
9.2 Upgrading the E-QUE card (MK1)
9.3 Upgrading the E-QUE card (MK2)
The procedures used to upgrade
E-QUE cards to Eclipse HX v9.1
can also be used to upgrade IVC-
32 and LMC-64 cards.
No PROM upgrade is required
11.3 Upgrading the E-MADI64 application, DSP and FPGA code
using EHX
11.4 Upgrading the E-MADI64 FPGA using the Xilinx tool set
No DSP upgrade required.
(Note – if the E-MADI64 card
is upgraded before the CPU
Card then there is no E-MADI
card LED activity during the
To Next Page
Loading...
