Clear-Com Eclipse HX series - Upgrading from 8.5.2

Eclipse | Upgrade Guide
Page 40
Order
System component
Upgrade procedure(s)
Notes
13
FreeSpeak II Beltpack,
Antenna Transceiver
17 Upgrading FreeSpeak II™ wireless systems
1.9 and 2.4 FS II Beltpack
application only
Table 3-8: Procedures for upgrading from Eclipse HX v8.5.1 to Eclipse HX v9.1
3.9 Upgrading from 8.5.2
The following table lists the procedures that you will require to upgrade from Eclipse HX v8.5.2 to Eclipse HX v9.1.
Important note:
The table lists the procedures in the order in which they must be carried out. To go to a procedure, click the cross-reference / link.
Order
System component
Upgrade procedure(s)
Notes
1
E-QUE card
IVC-32 card
LMC-64 card
9.1 Identifying MK1 and MK2 E-QUE cards
9.2 Upgrading the E-QUE card (MK1)
9.3 Upgrading the E-QUE card (MK2)
The procedures used to upgrade
E-QUE cards to Eclipse HX v9.1
can also be used to upgrade IVC-
32 and LMC-64 cards.
No PROM or FPGA upgrade is
required.
2
E-MADI64 card
No upgrade required.
3
E-FIB card
No upgrade required.
4
V-Series
panels
Uboot
14.3 Manually upgrading V-Series Panels
Kernel