Clear-Com FreeSpeak II User Manual

Page 105 399G169 Rev B 27 April 2016
15 Specifications
Specification
Value
Base Station to beltpack frequency
response
100 - 7.1 Hz
Number of FS II beltpacks per Base
Station
5 (FS-BASE-II-5) or 25 (FS-BASE-II),
depending on model
Number of antennas (FS-TA)
supported by Base Station
2 direct or 10 via antenna splitters
Number of antenna ports
2 x RJ45, 2 x Fiber (2 active at any
time)
Programming port
2 x LAN
GPIO port
DB15;
• 4 x relay outputs, normally open
and normally closed wiring
• 2 x GPI
Partyline: A,B,C,D
XLR-3F, ON/OFF termination control.
Power ON/OFF (A/B, C/D paired)
4 -wire
4 X RJ45 for 4-wire
Program input
XLR-3F, transformer isolated, line-level
input, independent Program Input level
control via rotary encoder
Stage Announce output
XLR-3M, transformer isolated, line-level
output with dedicated front panel Talk
key
Front panel headset
4-pin (or 5-pin male connector
depending on model. Automatic mic
detect

Clear-Com FreeSpeak II Specifications

General

Brand	Clear-Com
Model	FreeSpeak II
Category	Intercom System
Language	English