Page 75 399G169 Rev B 27 April 2016
The default username is: admin. The default password is: admin.
This takes you to the Overview page of the CCM for your device.
Note: If you cannot access the CCM for your Base you may have an IP conflict.
Check with your network administrator. Your device network settings are set
to Dynamic Host Control Protocol (DHCP) by default.
9.2 CCM walkthrough
Click or touch the navigation bar to reach pages.
For context sensitive help, click/touch the help button (
?).
9.2.1 Overview Page
This screen is the diagnostics screen for your FreeSpeak II Base system. It
gives a live overview of antennas and beltpacks in your system.
Click on any device in this page to access information and configuration
options. Click on blue text fields to edit.
To Next Page
Loading...
