Page 58 399G169 Rev B 27 April 2016
• Set low level limiter on a beltpack: (Menu/Settings/Headset
Options). The beltpack must have advanced menu options enabled
(Roles/Select Role/Menu access).
7.3 Configurable eavesdropping
7.3.1 About eavesdropping
Releases of FreeSpeak before FreeSpeak II Base left the beltpack mic
permanently open, meaning that audio coming from the beltpack could be
listened to even if the user had no active talk routes. This feature can now be
configured as required for each beltpack/Role in your wireless system.
The default for FreeSpeak II Base and above is Eavesdropping disabled.
However, earlier versions will revert to Eavesdropping enabled, the
headset mic will remain open.
7.3.2 Setting eavesdropping on beltpacks
• Set eavesdropping function in the CCM.
To Next Page
Loading...
