Page 86 399G169 Rev B 27 April 2016
Note: The default key behavior setting for a talk key to a Group is 'Talk Only'. See
6.3.1 Key behavior for more information.
You can see Group members in the Assignments page of the CCM. Navigate
to Assignments and click/touch the Groups tab. Beltpacks will only be visible
in the Group when they are online.
10.2 Example audio assignment
Follow steps 1. to 3. to connect audio from external devices to the Base
Station, populate Channels and set up communication with beltpacks.
1) Connect 2-Wire or 4-Wire audio devices to interfaces/ports.
To Next Page
Loading...
Need help?
General
