Page 55 399G169 Rev B 27 April 2016
7 Beltpack features
7.1 Menu key operation
The menu button on beltpacks has several functions.
• A two second press allows the user to enter menu mode.
• A quick tap on the button can be configured in two different ways by
setting 'menu key operation' in Roles. This quick tap functionality is
called 'Menu Key Operation'.
Menu Key Operation has two settings:
• Trigger Listen Again (replays the last call to the beltpack). This is
the default setting.
• Switch volume control (A and B, C and D).
Toggle beltpack rotary volume controls between A and B, C and D
This feature allows the user to toggle rotary volume control between keys A
and B, and C and D using a quick tap of the menu button. This is helpful if
you have different audio sources assigned to each key.
This mode has a 5 second inactive time-out, after which time to rotary
controllers will revert to controlling volume on keys A and B. To re-activate
this mode in order to adjust C and D, use another quick tap of the menu key.
To switch quickly between A and B, and C and D, tap the menu key to toggle.
7.1.1 Set menu key operation
This feature can be set under Roles in the CCM, from the Base Station front
menus and from the beltpack itself (advanced menu options).
• Set menu key operation in the CCM.
To Next Page
Loading...
Need help?
General
