Clear-Com FreeSpeak II User Manual

Page 98 399G169 Rev B 27 April 2016
12 Upgrading devices
12.1 About upgrading devices
To upgrade your devices, you will need to import the upgrade file provided
by Clear-Com into the unit. This can be done either from the browser-based
configuration tool (the CCM) or from the Base Station front menu screens.
The process is the same for each device type.
Device type
File type (where xxxx = revision no.)
Base Station
FSII_xxxxx.gz
Beltpack
PP_xxxxx.FFW
Antenna
RFP_xxxx.FFW
12.2 How to upgrade your devices
Upgrade from the CCM:
Upgrade from the Base Station:

Clear-Com FreeSpeak II Specifications

General

Brand	Clear-Com
Model	FreeSpeak II
Category	Intercom System
Language	English