Page 7 399G169 Rev B 27 April 2016
1.2 Flexible configuration
Pre-configured beltpack Roles allow both rapid set-up and flexible
configuration.
• Use simple default set-up; all beltpacks on Channel 1 and 2
• Customize the set-up to suit your needs.
• System has either 25 (FSII-BASE-II) or 5 (FSII-BASE-II-5) beltpack
Roles. FSII-BASE-II-5 offers a license to upgrade to 25 beltpacks if
required.
1.3 Live set-up and control
Use the front panels of the Base Station, or the browser-based Core
Configuration Manager (CCM).
Press Menu button on the Base Station to access controls:
Browser-based Core Configuration Manager (CCM), accessed via device IP
address.
To Next Page
Loading...
Need help?
General
