EasyManua.ls Logo

Clear-Com FreeSpeak II - Assigning Channels to Beltpack Keys

Clear-Com FreeSpeak II
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 47 399G169 Rev B 27 April 2016
From the Base Station:
6.3 Assign channels to Beltpack keys
Audio assignment for beltpacks is always done with a Role. A Role is a pre-
defined beltpack configuration map. You select a Role for a beltpack when it
is first powered on. The Role a beltpack is using can be changed from the
Base station, the CCM or the beltpack itself.
In the first case, it is easiest to use the default Role. This puts Channel 1 and
Channel 2 on to the beltpack keys.

Table of Contents

Other manuals for Clear-Com FreeSpeak II

Related product manuals