Page 16 399G169 Rev B 27 April 2016
2.6.3 Channels
• Change Channel name (label)
2.6.4 Groups
• Change Group name (label)
2.6.5 4-wire audio
• Program audio for 4-wire (Ports 1-4)
2.6.6 2-wire audio, A and B, C and D.
• Program audio for 2-wire (Ports A and B, C and D)
2.6.7 Key Assign
• Select each beltpack (Role) and program/edit audio on keys (A, B, C,
D)
2.6.8 Beltpacks
• Change beltpack Role
• Unregister beltpacks
• Check beltpack software version
• Fix beltpack Role
2.6.9 Roles
• Create, clone and delete Roles
• Edit Role settings, e.g. change channel, alter volume, set menu
access etc.
2.6.10 Antennas
• Change antenna name (label)
• Set cable compensation if required
2.6.11 Networking
• Station id (name)
• DHCP or Static IP
• Base station IP address
To Next Page
