Colop e-mark - Page 3

Index of illustrations
Fig. 1: Safety instructions on the underside of the e-mark ...................................................................... 15
Fig. 2: Package content ......................................................................................................................... 16
Fig. 3: e-mark parts ................................................................................................................................ 17
Fig. 4: Marking device assembly ............................................................................................................ 18
Fig.5: Docking station assembly ............................................................................................................. 19
Fig. 6: Reference imprint 14 x 100 mm .................................................................................................. 20
Fig. 7: Packaging ................................................................................................................................... 22
Fig. 8: Opening and removing the cover ................................................................................................ 23
Fig. 9: Opening the battery compartment and remove battery ................................................................ 23
Fig. 10: Battery contact insulating tape .................................................................................................. 24
Fig. 11: Opening the sliding panel .......................................................................................................... 24
Fig. 12: Ink cartridge .............................................................................................................................. 25
Fig. 13: Insert ink cartridge ..................................................................................................................... 25
Fig. 14: Close lower flap cover ............................................................................................................... 26
Fig. 15: Insert battery ............................................................................................................................. 26
Fig. 16: Example test imprint with SSID and password .......................................................................... 27
Fig. 17: On/off switch ............................................................................................................................. 30
Fig. 18: Remove e-mark from the docking station .................................................................................. 30
Fig. 19: Marking from left to right ............................................................................................................ 31
Fig. 20: Marking from right to left ............................................................................................................ 31
Fig. 21: Light pipe changes from green to yellow (indicating one of the stored imprints as active position)
........................................................................................................................................................ 32
Fig. 22: Multi-line imprint procedure ....................................................................................................... 32
Fig. 23: Place into docking station .......................................................................................................... 33
Fig. 24: Light Guide ................................................................................................................................ 34
Fig. 25: Light Guide directions ................................................................................................................ 34
Fig. 26: Color sample released by automatic print head cleaning ........................................................... 38
Fig. 27: Do not direct towards eyes, face or skin. Light irritation possible ............................................... 38
Fig. 28: Slide out print head wiper .......................................................................................................... 39
Fig. 29: Clean print head with wiper ....................................................................................................... 39
Fig. 31: Software Wizard – WIFI information .......................................................................................... 40
Fig. 30: Software wizard – Welcome page ............................................................................................. 40
Fig. 33: Software wizard – Test imprint .................................................................................................. 41
Fig. 32: Software wizard – Connection to e-mark ................................................................................... 41
Fig. 35: e-mark connect page................................................................................................................. 42
Fig. 34: Software wizard – personalization option .................................................................................. 42
Fig. 36: Example image of WIFI connection in the settings of the mobile device .................................... 44
Fig. 37: USB connection ........................................................................................................................ 44
Fig. 38: Power plug ................................................................................................................................ 45
Fig. 39: Charge battery .......................................................................................................................... 46
Fig. 40: Open and remove cover ............................................................................................................ 48
Fig. 41: Battery ...................................................................................................................................... 48
Fig. 42: Open battery compartment ........................................................................................................ 48
Fig. 43: Opening the sliding panel .......................................................................................................... 49