ComAp InteliLite 9 - Page 100

InteliLite 9 Global Guide
100
Actual value of counters is located either as the same setpoints Maintenance Timer 1 (page 187), Maintenance
Timer 2 (page 187) and Maintenance Timer 3 (page 188) or as values Maintenance 1 (page 277), Maintenance 2
(page 278) and Maintenance 3 (page 278).
When the value of counter reaches 0, the alarm Wrn Maintenance 1 (page 365) or Wrn Maintenance 2 (page
366) or Wrn Maintenance 3 (page 366) is active until the respective counter is readjusted back to nonzero
value.
Unused timer has to be adjusted to maximal value 10000 (OFF).