Making Intercom Calls
Thereare two methods for making an intercom call. One causes the called telephone
to ring (tone-first). The other causes your voice to sound out at the called telephone
(voice-first). Your installer can set the system to deliver either tone-first or
voice-first calling.
NOTE: The following instructions assume a tone-first setting. You can change
a call to voice announce signaling for that call simply by pressing the
INTERCOM button again after dialing the extension number or by pressing the
DSS/BLF button again.
•
To manually cause the other telephone to
ring (tone calling),
1. PRESS INTERCOM.
2. DIAL extension number (called telephone will
ring).
•
To tone call automatically,
1. PRESS DSS/BLF button (called telephone will ring).
NOTE: The following instructions assume a voice-first default setting. Any
user can change a call to a tone signaling for that call simply by pressing the
INTERCOM button again after dialing the extension number or by pressing the
DSS/BLF button again.
•
To voice announce manually,
1. PRESS INTERCOM.
2. DIAL extension number.
3. SPEAK your announcement.
•
To voice announce automatically,
1. PRESS DSS/BLF button.
2. SPEAK your announcement.
24 LCD Speakerphone Station User’s Guide
Making Calls GCA70-258
Calling J Smith
CALLBK
MSG
Tone-First Calling
Ext 321 J Doe
Voice-First Intercom Call
To Next Page
Loading...
