Call Parking
Parking a Call
You can place an intercom or outside call on hold in the system so that it can be
answered from any station, even though it may not have a line appearance for the
call. You accomplish this by placing the call in one of many park orbits, where the
call remains until it is answered.
•
To park a call in orbit,
1. While on the call, PRESS INTERCOM OR PRESS TRNS/CNF if
intercom call.
2. DIAL
*.
3. DIAL code for park orbit (
910 to 999 for orbit
10–99).
4. Rememberthecodeforlateruseormakeitknowntothosewhoneed
to know it in order to retrieve the call.
• To park a call using a programmed PARK button,
1. While on the call, PRESS the programmed PARK button (the
system places the call in a preselected park orbit and lights the
PARK light).
•
To retrieve a call that was placed on hold in the system
(parked),
1. PRESS INTERCOM.
2. DIAL
#.
3. DIALcode for orbit (
910 to 999 for orbit 10–99), OR
PRESS programmed PARK button.
Handling Park Recalls
Whena parkedcall timesout ofthesystem, itreturns toyour telephoneinthe formof
a park recall (you hear four short tone bursts at 12-second intervals).
•
To answer a park recall,
1. SELECT
ANS
. The call will then connect to your station.
38 LCD Speakerphone Station User’s Guide
Advanced Call Handling GCA70-258
To Next Page
Loading...
