Your Speakerphone’s Display Lights
The lights (LEDs) on your LCD speakerphone indicate the status of lines,
features, and intercoms.
Busy Lamp Field (BLF) lights (next to a Direct Station Select/Busy
Lamp Field or DSS/BLF programmable button):
•
Steady red = station is in use.
•
Flashing red = station is receiving a call.
•
Winking/Fluttering red = message-waiting light set for you by station asso
-
ciated with that DSS button.
Next to a line button:
•
Steady green = this is your line, either on-hook (in a hands free mode) or
off-hook, when the line is active.
•
Steady red = another station is using this line.
•
Flashing red = a call is coming in on this line.
•
Flashing orange = this line will be answered when you lift the handset.
•
Winking green = your line is on hold.
•
Winking red = the call has been placed on hold by another station.
•
Fluttering orange or green = your line has recalled from hold.
•
Fluttering red = the line put on hold by another station has recalled.
NOTE: You can find the programmable buttons that the installer designates
line buttons in the same location as the DSS/BLF buttons. Ensure that these
buttons are labeled correctly to indicate their unique features.
Next to a fixed feature or programmable feature button:
•
Steady red = the feature is on.
•
Steady off = the feature is off.
NOTE: You can find the programmable buttons that the installer designates
feature buttons through user programming in the same location as the DSS/BLF
programmable buttons. Ensure that these buttons are labeled correctly to indi
-
cate their unique features.
10 LCD Speakerphone Station User’s Guide
Getting Started GCA70-258
To Next Page
Loading...
