Your Speakerphone’s Buttons
Hold Button (HOLD)
•
Places a line or intercom call on hold
•
Stores pauses in number sequences during programming
•
If available, scrolls through LCD response messages
•
If multiple held calls feature is available, scans or scrolls through calls
placed on hold (when hold light is flashing)
Interactive Buttons (located below alphanumeric display)
•
Provide quick and easy access to system features
•
Provide straightforward button programming without dialing codes (the
interactive buttons themselves, however, are not programmable)
Intercom Button (INTERCOM)
•
Selects an intercom line
•
Allows you to initiate many of the telephone’s features
Mute Button (MUTE)
•
Keeps the person on the line from hearing your conversation
•
Allows reply to a Subdued Off-Hook Voice Announcement (SOHVA).
Direct Station Select/Busy Lamp Field (DSS/BLF)
Programmable Buttons
•
Allow you to store numbers for automatic dialing functions
•
Allow you to store telephone extension numbers forDirect Station Selection
(DSS)
•
May be programmed as a feature button
•
May be designated a line button by your system installer
Shift Button (SHIFT)
•
Allows you to enter a second tier for storing and/or automatically dialing
speed dial numbers. (That is, you can store two speed dial numbers at every
programmable button location—one in the regular tier and one in the second
tier). You activate the shift function by pressing this button and turning the
shift light on before storing or automatically dialing a speed dial number
from the second tier.
8 LCD Speakerphone Station User’s Guide
Getting Started GCA70-258
To Next Page
Loading...
