Programming
DSS Numbers
Storing another station extension number at a DSS/BLF programmable location
allows you to monitor that station, dial with the press of one button, or pick up or
hold calls at that station quickly and conveniently.
•
To store an intercom number as a DSS number,
NOTE: Storing DSS numbers at button locations will overwrite any previously
stored numbers.
1. SELECT
OPTIONS
.
2. SELECT
NEXT
until the
DSS
option appears.
3. SELECT
DSS
.
4. PRESS programmable button to choose DSS/BLF
button location.
5. DIAL extension number.
6. REPEAT the previous steps, OR SELECT
EXIT
.
7. PRESS SPEAKER to end.
CAUTION
Do not attempt to program interactive buttons; doing so can cause the sys
-
tem to make features unavailable. If you inadvertently program interactive
buttons, you can retrieve their functions in the following manner:
1. PRESS INTERCOM
**1
2. PRESS the interactive button to be reprogrammed
3. DIAL
91, 92,or 93 (for buttons from left to right).
LCD Speakerphone Station User’s Guide 51
GCA70-258 Programming
6
Enter Ext:
EXIT
Designating an Extension
To Next Page
Loading...
