Comdial Impact 8024S Series - 4 Advanced Call Handling; Waiting for a Line (Queuing)

Advanced Call Handling
Waiting For A Line (Queuing)
If all the lines in a line group are busy, you can place your telephone in a queue to
await an idle line.
•
To queue for a line group,
1. PRESS INTERCOM.
2. DIALthe line group access code (see Line Group Access code table
on page 62 for your system’s codes).
3. HEAR busy tone.
4. DIAL
*6.
•
If you have line appearance for a particular line and wish to
queue for it,
1. OBSERVE the busy status light (LED).
2. PRESS INTERCOM.
3. DIAL
*6.
4. PRESS line button.
5. When line group is free, your telephone sounds several short tone
bursts. When you hear this, lift handset, hear dial tone, and place
call.
•
To cancel line queuing or line group queuing,
1. PRESS INTERCOM.
2. DIAL
#6.
LCD Speakerphone Station User’s Guide 31
GCA70-258 Advanced Call Handling
4