Nonverbal Messaging
LCD Message Delivery
You can set system-supplied messages at your station to be received and displayed
by a calling LCD speakerphone.
•
To turn on a message from your telephone,
1. PRESS INTERCOM AND DIAL *02.
2. DIAL the desired code number from your message list (01–30) on
the next page, OR PRESS HOLD button to scroll through the
available messages AND DIAL # to select.
NOTE: See following page for LCD dialing codes.
•
Fora “BackAt” message,dialthe codefor timenumbersand
colon from dialing codes table.
(For example, DIAL
#0001290405
for the time 01:45).
•
For a “Call” message, dial code for telephone number of
your new location.
(For example, DIAL
# 09 07 08 15 02
02 00 00
for the number 978–2200).
3. DIAL
# AND PRESS SPEAKER to end message.
•
To turn off the message and your intercom light,
1. PRESS INTERCOM AND DIAL #02.
LCD Speakerphone Station User’s Guide 45
GCA70-258 Nonverbal Messaging
5
To Next Page
Loading...
