5. CHOOSE your speed dial route from the
following list:
•
PRESS line button to select outside line,
•
DIAL 00 to select prime line or last line
used,
•
DIAL 01 to 16 to select line group,
•
PRESS INTERCOM button or dial 8 to select intercom.
NOTE: You may need a pause between numbers to compensate for differences
in response time between your system and the host system (ask your attendant
about this). To store a pause, press HOLD, then continue dialing. If your system
is behind a host system that needs a hookflash to access a feature, press TAP to
store a hookflash, then continue dialing.
6. DIAL number (up to 16 digits long).
7. SELECT
SAVE
to store the number.
8. REPEAT previous steps until all numbers are
stored, OR SELECT
EXIT
.
9. PRESS SPEAKER to end.
LCD Speakerphone Station User’s Guide 53
GCA70-258 Programming
EXIT
Preselect
Selecting Line or Intercom
SAVE
BKSP
EXIT
Dial Number
Dialing a Speed Number
To Next Page
Loading...
